2 Pack RV Electric Step Switch Replacement, 369299 Magnetic Door Switch Compatible with Kwikee 32 Series Electric Steps, for 2000 & Newer RV, Auto Step Extend & Retract Sensor (Black)

If your RV step no longer extends or retracts reliably when the door opens or closes, the problem is often not the entire step system—but a failed RV step magnetic switch. Over time, worn or faulty magnetic sensors can cause delayed response, intermittent movement, or complete step failure. This RV Step Magnetic Switch replacement (369299) is designed to fix common sensor issues and restore proper automatic step operation. By replacing the faulty RV step magnet switch, you can regain smooth, dependable step extension and retraction without the cost and hassle of replacing the entire electric step assembly. Compatible with 32 Series Electric Steps, this magnetic door switch detects door movement accurately and sends a stable signal to the step controller, allowing your RV steps to respond automatically every time the door opens or closes. Once installed, your steps operate as intended—safe, predictable, and ready for daily use. Installation Steps 1. Power Off & Remove Old Switch Disconnect power and remove the old door switch. 2. Connect the New Switch Wiring Route the two wires along the original path. Connect one wire to Power (control module) and one to Ground (vehicle chassis). Make sure connections are tight with no exposed wires. 3. Install Switch & Magnet Door Frame (Main Switch): Test position with double sided tape first. After confirming proper step operation, secure with screws. Door (Magnet): Align magnet vertically with the switch. Step should extend when door opens 1–4 in (2.5–10 cm). Mount magnet at least 6 in (15 cm) above door bottom. 4. Test & Secure Restore power and test auto extend/retract. Adjust alignment if needed. Secure screws, tidy wires with zip ties. Seal bottom wire hole with waterproof sealant. Notes: Manual measurement, please allow slight errors in size. Please allow slight color differences due to different monitors and light effects

• Perfect Compatible with 32 Series Electric Steps: Compatible with 32 Series electric steps, this RV Step Switch Replacement is designed to replace the 369299 magnetic switch. It helps fix common issues where the step no longer extends automatically due to a faulty RV door switch
• Restores Automatic Step Operation with Magnetic Sensing: This RV step magnet switch uses activated magnetic sensing to restore proper step movement. When the RV entry door opens or closes, the magnetic switch triggers the step to automatically extend or retract, making entry and exit safer and more convenient for you and your guests
• Reliable Performance with Built In Magnetic Reed Sensor: Built with a durable reed sensor, this RV Step Magnetic Switch delivers stable ON/OFF signals to the step controller. It helps prevent intermittent failures, false activation, or inconsistent step movement caused by worn or failing switches
• Easy Installation, DIY Friendly Replacement Kit: Designed for quick replacement using existing wiring and mounting locations, this RV step switch installs easily with no assembly required. A practical DIY solution that saves time and avoids costly professional RV repair services
• Cost Effective Alternative to Replacing the Entire Step System: This 369299 Magnetic Switch compatible with 32 Series Step restores reliable automatic step operation at a fraction of the cost of replacing the entire step assembly or control module, making it a smart and economical repair choice for RV owners