6PCS High Precision AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit (6)

This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.Specification:Product parameter: AS5600 magnetic encoderColor: As pictures shown.Size: approx. 23x23mm(0.91x0.91in)Product type: Non-contact magnetic inductionOut mode:IIC ,PWM, voltage, etc.Interface description:VCC: 3.3 VGND: Power GroundOut: PWM / analog voltage output DIR: Rotational direction (grounding=clockwise value increases ; Connect to VCC =Clockwise values decreased)SCL: IIC communication clock lineSDA: IIC communication data lineGPO: Mode selection (internal pull-up, ground=Programming mode B)Feature:1.It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent. Each PCB board has been tested by flying probes before leaving the factory, and the quality is worth relying on.2.Non-contact magnetic induction angle measurement module. High precision, multiple output modes, IIC, PWM, voltage, etc.3.AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.Note:Please allow 1-3cm error due to manual measurement.Package includes:2x AS5600 Magnetic Encoder

• This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
• AS5600 magnetic encoder high precision, a variety of output modes: IIC , PWM and voltage. Non-contact magnetic induction angle measurement module.
• Made of high quality material, the module is durable and has long service life. It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent.
• AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.
• Package included: 2pcs AS5600 magnetic encoder module with magnet and pin header