QH-2/h Metal P-o-w-d-e-r Spray Welding Torch Oxygen Acetylene Flame Welding Gun with 3pcs Welding Nozzle

Model: No.1 Nozzle Orifice Nozzle Orifice Dia:?1.6mm Gas pressure:?Oxygen?0.30Mpa Acetylene 0.05-0.10Mpa Gas consumption:?Oxygen?0.65-0.70m?h Acetylene 0.55-0.65 m?h Power Velocity :1.0-1.4kg/h Length: 470mm Model: No.2 Nozzle Orifice Nozzle Orifice Dia:?1.9mm Gas pressure:?Oxygen?0.35Mpa Acetylene 0.05-0.10Mpa Gas consumption:?Oxygen?0.80-1.00m?h Acetylene 0.70-0.80 m?h Power Velocity :1.4-1.7kg/h Length: 470mm Model: No.3 Nozzle Orifice Nozzle Orifice Dia:?2.2mm Gas pressure:?Oxygen?40Mpa Acetylene 0.05-0.10Mpa Gas consumption:?Oxygen?1.00-1.20m?h Acetylene 0.90-1.10 m?h Power Velocity :1.7-2.0kg/h Length: 470mm The main components in one set: 1. 3pcs welding nozzle , 2.The connecting nuts , 3 p-o-w-d-e-r bucket seat 4 p-o-w-d-e-r hopper 5 .control p-o-w-d-e-r feeder , 6. p-o-w-d-e-r pressing hand 7. oxygen joint , 8. the acetylene joint , 9. the handle 10. acetylene handwheel , 11 .in the middle of the subject 12 .oxygen handwheel 13 .hybrid junction 14 .mixed gas pipe

• 1. medium pressure type structure, it must be used in the medium pressure acetylene generator and an acetylene cylinder pipe, absolutely should not be used in low pressure acetylene generator and pipeline.
• 2. Spray gun, if no ignition, can not press p-o-w-d-e-r valve switch, to avoid blockage.
• 3. Due to the p-o-w-d-e-r 's particle size is not uniform, or become damp and other factors, make the p-o-w-d-e-r valve switch failure, clogging, it shouold be repaired in time before be used again .
• 4. attention --must use dry p-o-w-d-e-r.
• 5. regular cleaning spray gun, in order to avoid the gas tube holes are blocked. while cleaning pipe hole ,ejects out and clean up the control p-o-w-d-e-r feeder.