XH-W3005 W3005 DC 12V 24V 220V 10A Digital Humidity Controller Hygrometer Control Switch 0~99% RH w/Humidity Sensor | Onecolor

Sensors<;;Stop humidity=Humidification modeSetting method:;stop humidity (the program automatically determines that the working mode is humidification mode)Long press the up button flash and then use the up and down buttons to set the starting humidity.Long press the button flash and then use the up and down buttons to set the stop humidity.Use Cases:In animal husbandry when the indoor humidity is below 35.8% RH the humidifier will start working and when the humidity reaches 56.7% RH how can we set it to stop humidification?AmmetersFeature:Model: XH-W3005Humidity range: 00%99%RHHumidity control accuracy: 0.1% RHMeasurement accuracy: +/- 2% RHLoad power: 12v 120w or 24v 240w or 220v 1500w (depending on your choice)MAX output: 10AOutput type: direct outputSize: 60* 45 * 31 mmDescription:Connect the power supply diplay instructions humiditySet the starting humidity: press the UP button to display the starting humidity press and hold for about 3 seconds to start the humidity flashing then press UP or DOWN to adjust the setting.Set stop humidity: press the down button to display the stop humidity press and hold for about 3 seconds to stop the humidity flash then press UP or DOWN to adjust the setting.Restore settings: Press UP and DOWN at the same time 888 will be displayed then the humidity will be detected automatically.1 digital humidity controller1 humidity sensorProblems / SolutionsHow to restore the default settings?Under the condition of power on press and hold the up anddown keys for 3 seconds at the same time.After the digitaltube displays 888.Nixie tube display LLLIf the digital tube displays LLL the sensor isout of order. Check the sensor or replace itIf the digital tube displays LLL the sensor isout of order. Check the sensor or replace it

• Sensors
• Ammeters
• XH-W3005 W3005 DC 12V 24V 220V 10A Digital Humidity Controller Hygrometer Control Switch 0~99%RH Hygrostat w/ Humidity Sensor